Stenner PCM-5 Pump Control Module

Description

The Stenner PCM-5 Pump Control Module consists of three components: the PCM pump control module, a Single head fixed output pump, and a Dry contact water meter. The water meter sends a pulse signal to the PCM which activates the pump to deliver the desired dose based on water volume. The PCM turns on the pump for the set duration determined to inject the solution into the water line. This module has a run time duration of 0.5 to 5.0 Seconds. The PCMs available time range can be converted to any of the four time ranges available

The Stenner Pump Control Module is a component of the proportional feed system, which delivers repeatable doses regardless of the systems flow rate. The system is used in applications requiring proportional chemical injection.

Specifications

Housing: Polycarbonate plastic

Timer: Microcontroller with triac output

Turndown ratio: 10:1

Input signal: Non-voltage dry contact, water meter

Time range: Interchangeability located inside

Reset time: Immediate

Minimum signal durations: 10 milliseconds

Input electrical: 120V 60Hz

No load current: 0.45 mA AC maximum

Output electrical: Maximum device load, 1.8 amp at 120V