Stenner Pumps Econ Integrator™ - E20RHG

Description

The Econ Integrator line of pumps from Stenner Pumps are efficient, compact pumps cULus listed for indoor and outdoor use. The E20RHG model pumps 16.0 gallons per day. The pump has a water meter operational mode time adjusted to accurately inject a fixed amount of chemical per volume of water determined by the pulse rate of the water meter in use.

A built-in repeater relay provides a dry contact output signal that replicates the same signal the pump receives. The relay feature is especially useful in livestock or poultry operations where an existing dry contact water meter is being utilized to tally water consumption to a controller. Water consumption is uninterrupted. The relay feature is also useful in installation of multiple pumps, all of which can be activated by one dry contact pulse water meter.

The Integrator is economical, as it doesn't need an additional water meter dedicated to chemical feed for water treatment.

Select the Econ Integrator for Water Treatment

Water and water line disinfection, pH adjustment

Injection of nutrients and supplements into water lines

Oxidation of iron, hydrogen sulfide or manganese

Injection of polyphosphate solutions for corrosion and scale control on plumbing features

Unique Stenner Features

Patented quick release pump head for periodic tube replacement without tools

Inject common undiluted chemicals without harm to the pump; eliminate daily stock solution maintenance
Solid one-piece pump tube construction

How It Works

Wire two of the Integrator leads to the water meter, connect another two lead to the house controller, plug the pump into a receptacle and install an injection point in the pipe. The pump is equipped with a safety lockout feature and a standby mode. While in standby mode, the pump is inactive and the relay will continue to register water consumption to the controller when the pump has power applied to it.

The standby mode also allows tube replacement in the pump head without disconnecting power and/or the lead wires. The pump has a 20:1 turndown ration in 1% increments adjustable by a digital keypad with a backlit LCD screen. The pumps are equipped with a wall adapter power supply.

Can be Used for Undiluted Chemicals: Acids, Chlorine, Hydrogen Peroxide

Flow Rate Outputs – 80 PSI Max

QC Part #
Mfg Part #
Pump Tube
Roller Assembly
Gallons Per Day
Gallons per Hr
Oz Per Hr
Oz per Min

Approximate Max Outputs @ 50/50 Hz

122675
E20RHF
F
White
4.5
0.19
24.0
0.40

122676
E20RHG
G
Black
16.0
0.67
85.3
1.42

122677
E20RHH
H
Black
30.0
1.25
160.0
2.67

Specifications

Flow Rate Output Control: 6 button control panel with LCD display

Reproducibility: +/- 2%

Max Working Pressure: 80 PSI

Max Operating Temp: 104 F

Max Suction Lift: 25' vertical lift, based on water

Motor Type: 24 VDC, brushless

Shaft RPM (Avg Max): 60

Duty Cycle: Continuous

Motor Voltage (Amp Draw): 120 V, 60 Hz (0.17)

Power Cord Type: 120 V, 60 Hz; STP-2W

Power Cord Plug End: Wall adapter, Class II power supply; 100-120 V, 60 Hz – 1.0A max input, 2 prong, polarized 24 VDC, 1.25A output

Classification: Indoor/outdoor

3.7" W x 5.9" H x 5.4" W